Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and the Yahoo Answers website is now in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
Intel D102GGC2 memory problem.?
I have an Intel D102GGC2 motherboard it supports 2GB of DDR2 memory and it has a Pentium D 840 processor. I'm using Mushkin Silverline DDR2 ram. 2x1GB kit. What I've found is with both sticks of ram in the board wont post. But it will if you only have one stick in. I've switched out the sticks of Ram and both of them work in it alone, but when ever you put the full 2GB of ram in the board, you turn it on and nothing. No beep codes, no video, nothing. I've also tried another set of ram and same thing happens with them. I looked around in BIOS and didn't see any settings that looked helpful. Any ideas?
I have looked into all the info on this board and intel's site says it supports 2GB as well as other people with this board have said theirs works with 2GB.
Were talking about just getting it to POST with the 2GB of ram. I been working on computers for 9 years and I've tried just about everything aside from BIOS upgrade which is always a pain.
Updated BIOS still has same problem. :/
SOLVED! SOLVED! SOLVED! SOLVED!
I just found the working solution to get both sticks working together. in BIOS under "Advanced" I went into "Chipset Configuration" then "Memory Configuration" changed the "Memory Control" to "Manual - Aggressive" and set memory frequency to "667MHz" the highest option it gives you. After doing this both sticks of RAM finally work together now. I updated BIOS so if you don't have an option for memory configuration then you may have to update BIOS first. I had to make these changes with only one stick of ram in and once I changed the settings and saved them I turned it off, added the other stick of ram now its running fine. -Cheers!-
2 Answers
- KarlLv 610 years agoFavorite Answer
I have found that some motherboards although they say they support a certain amount of RAM, it is not always the case.
You can check the motherboard web site to see if there is a BIOS update for the motherboard that would resolve the issue otherwise you may just have a motherboard that has a defect in the RAM addressing circuitry.
- ?Lv 710 years ago
should be PnP . make sure they're clean . and they seat right . before you sign in do a restart . after you sign in and it is not found , try a dskchk. and a manual install what system(OS)) are you running ? try the site manufacture of the stick they may have to provide drivers.
Source(s): personaly after all fails i would emergency boot with a power cutout and back on . ie; power surge switch , on - off/on quick. will force a restart. don't forget safe mode as well.... G.L.
